Other Products

Related Videos to Other Products
Anterior
Siguiente
TGM
Bronze and Copper Fittings
Model: Various
Complete line of brass and copper fittings for any installation or repair of any piece of air conditioning or refrigeration equipment.

Please contact your Refricenter salesperson with any inquiries regarding our bronze and copper fitting line.
Kickstart
KickStart Hard Start
Model: KS1, T05
- Hard start devices extend the life of compressors by bringing them up to full speed quicker and more efficiently
- Assist compressors in starting under very adverse ambient conditions such as low voltage or high head pressures.



- Model T05: 1-3 HP
- Model KS1: 3.5-5 HP
Nu-Calgon
A/C EasySeal
Model: 4050-06
- Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems
- Eliminates expensive leak search and repair
- Travels with refrigerant to find leaks fast
- Utilizes a reusable hose



- Seals SMALL leaks on units with 1.5-5 Tons of capacity
RGF Environmental Group
REME HVAC Cell
Model: REMEHVAC305
- REME, or Reflective Electro Magnetic Energy, utilizes an electro magnetic energy cell to create Ionized-Hydro-Peroxides™, which act as an air purifying plasma.
- REME is installed directly into HVAC ductwork.
- Electrical: 110-220 VAC 50/60Hz (Available in 24 V)
Ritichie Engineering - Yellow Jacket
Series 41 Manifold
Model: 41213
- Flutterless™ technology means surge protector and silicone dampened movement helps minimize needle pulsation for easier, more accurate readings
- Sliding double "O" ring pistons reduce wear
- Manifolds include color-coded Yellow Jacket charging hoses
Diversitech
Foam-Plus™ Coil Cleaner
Model: 35820
- No harsh fumes; non-acid
- Removes hard water deposits, dirt & dust
- Washes away condensation
- Improves air flow
- Increases energy efficiency
Diversitech
Non-Fusible Disconnect Switch
Model: DDS60U
- 60 A non-fusible disconnect switch
- Convenient design allows for easy access to controls
JMF
Line Sets
Model: DL
-Twin Tube
-White Insulation
-14-4 Wire
-Flared

Available Sizes:

1/4" X 3/8" X 15'
1/4" X 3/8" X 25'
1/4" X 3/8" X 50'

1/4" X 1/2" X 15'
1/4" X 1/2" X 25'
1/4" X 1/2" X 50'

1/4" X 5/8" X 15'
1/4" X 5/8" X 25'
1/4" X 5/8" X 50'

3/8" X 5/8" X 15'
3/8" X 5/8" X 25'
3/8" X 5/8" X 50'
Ultravation
SolarisUV®
Model: UVASLX1024
- Breaks down household odors from kitchens to laundry rooms—even bathroom and swimming pool odors
- Kills bacteria and viruses circulating in the air and on surfaces—including countertops
- Freshens the air in the same way a thunderstorm clears the air of contamination
- Microscopic pollution is gathered into larger filterable groups for unprecedented removal
of airborne irritants
- Commercial grade stainless steel
- Electronic Monitoring / Lam Replacement indicator



Exclusive Only at Refricenter
Not Available Online


Solaris-Icons-thm-204pixh
Ecosmart
Ecosmart 8kW Electric Tankless Water Heater
Model: ECO 8
- 240V
- 8 kW
- Lifetime Warranty
- 1/2" CF
- 8 AWG wire required

ETL

UL
Ecosmart
Ecosmart 11.8 kW Electric Tankless Water Heater
Model: ECO 11
- 220V
- 6 AWG wire required
- Lifetime Warranty
- 1/2" CF Pipe Fittings
- Single Phase


ETL

UL
Ecosmart
Ecosmart 18kW Electric Tankless Water Heater
Model: ECO 18
- 240V
- 18kW
- Lifetime Warranty
- 2 x 8 AWG wire required

UL

ETL
Ecosmart
Ecosmart 27 kW Electric Tankless Water Heater
Model: ECO 27
- 240V
- 27kW
- Lifetime Warranty
- 3 x 8 AWG wire required
- Single Phase

ETL

UL
Mason Industries
C - 1" Def. Single Spring
Model: CA Series
TYPE “C” Spring Mountings provide a packaged solution to troublesome vibration problems. Since the static deflection of the spring element is much greater than that provided by most rubber materials, these units will perform where it is necessary to establish low natural frequencies or to use a mounting that is more yielding than the supporting floor.

Screen Shot 2018-04-13 at 10.59.49 AM
Mason Industries
Double Deflection LDS Hangers
Model: HDA Series
To complete an envelope, secondary walls must be introduced with the same consideration given to mass and air gap as covered in the floor discussion. The problem is simpler, because the walls normally support only their own weight and they need not have the structural strength of the floor. Poured concrete or concrete block walls should approach the floor density. It is most important that block joints are properly filled with mortar and painting the walls so the construction is more nearly airtight helps.
Refricenter
Refrigerants
Model: Refrigerants
Refricenter stocks the following refrigerants:

- NU22B
- R134A (tank & can)
- R22
- R4041A
- R407A
- R407C
- R410A
- R422D
Mason Industries
Spring Hanger
Model: HS Series
We reduced these problems by writing specifications and manufacturing hangers with the hole in the bottom of the hanger box as large as the I.D. of the spring. The HS Spring Hangers evolved using our standard A, B and C Springs and seating them in LDS cups with projecting bushings to line the hole in the lower end of the box
Miami Tech Inc.
Flat S-Lock
Model: FSL
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga / 24ga

Galvanized steel provides excellent corrosion resitance and longevity.
Available in multiple gauges to suit your needs.
Sold in bundles of 10 pieces (100').

Screen Shot 2018-04-23 at 12.17.37 PM
Miami Tech Inc.
Standing S-Lock
Model: SSL
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga / 24ga

Galvanized steel provides excellent corrosion resitance and longevity.
Available in multiple gauges to suit your needs.
Sold in bundles of 10 pieces (100').

Screen Shot 2018-04-18 at 10.40.28 AM
Miami Tech Inc.
Drive Cleats
Model: DRC
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga / 24ga

Galvanized steel provides excellent corrosion resitance and longevity.
Available in multiple gauges to suit your needs.
Sold in bundles of 10 pieces (100').

Screen Shot 2018-04-18 at 10.49.21 AM
Miami Tech Inc.
Slotted Angle Iron
Model: SA
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:16ga / 14ga

Galvanized steel provides excellent corrosion resistance and longevity.
Scored every 12".
Sold in bundle quantities of 5 pieces (50').
Custom sizes avaliable.

Screen Shot 2018-04-18 at 11.08.20 AM
Miami Tech Inc.
Boot Rails
Model: BR
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga / 24ga / 22ga

Galvanized steel provides excellent corrosion resitance and longevity.
Available in multiple gauges to suit your needs.
Bundle quantities of 50 pieces.

Screen Shot 2018-04-18 at 11.15.26 AM
Miami Tech Inc.
Can Stock
Model: CS
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:30ga

Galvanized steel provides excellent corrosion resitance and longevity.
Available in multiple heights to fit your needs.
Sold by the foot, full length 10' each.
Box quantity: 20pcs (200ft).

Screen Shot 2018-04-18 at 11.24.29 AM
Miami Tech Inc.
U-Channel
Model: UC
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga / 22ga

Galvanized steel provides excellent corrosion resitance and longevity.
Sold in bundle quantities of 10 pieces (100').
Custom sizes available.

Screen Shot 2018-04-18 at 11.31.18 AM
Miami Tech Inc.
Duct Grille Clip
Model: DC-150
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:22ga

Designed for R-4 and R-6 ductboard.
Packaged in a box.
Priced per box.

Screen Shot 2018-04-18 at 11.45.10 AM
Miami Tech Inc.
Fiberglass Duct Support
Model: DS-1
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:22ga

Galvanized steel provides excellent corrosion resistance and longevity.
Bundle quantities of 10 pieces.
Available in bulk quantities.

Screen Shot 2018-04-18 at 11.58.46 AM
Miami Tech Inc.
Tab Collars for Fiberglass
Model: FCL
Category:Collars
Material:Galvanized Steel
Gauge:30ga / 28ga

FCL designed to accommodate R-4 and R-6 ductboard.
180º hemmed circumference/no raw edges.
FCL flange dimension (.700") exceeds Florida building code requirement of .625" (FL Building Code #603.5.6).

FCL: One piece wide tab collar for R-4/R-6 ductboard

Screen Shot 2018-04-24 at 9.05.45 AM
Miami Tech Inc.
Bull-Nose WYE
Model: BNW
Category:Metal Fittings
Material:Galvanized Steel
Gauge:30ga / 28ga

Galvanized steel provides excellent corrosion resistance and longevity.
Female connection at the base.
Crimped male connection on the top and side branch.

Screen Shot 2018-04-24 at 9.29.18 AM
Miami Tech Inc.
Metal Tee
Model: TEE
Category:Metal Fittings
Material:Galvanized Steel
Gauge:30ga / 28ga / 26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Listed UL181: class 0 air duct.
Meets NFPA bulletin 90-A requirements.
Not for use as a range hood duct.
24 gauge available in sizes 6" and larger.
Sizes 4" and 5" are only available in 30 gauge / 26 gauge.

Screen Shot 2018-04-24 at 9.45.37 AM
Miami Tech Inc.
Adjustable Elbow
Model: AE
Category:Elbows
Material:Galvanized Steel
Gauge:30ga / 28ga / 26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Crimped on one end.
Shipped on trays.
Packaging available in donuts upon request.

AE30: 30ga adjustable elbows.
AE28: 28ga adjustable elbows.
AE26: 26ga adjustable elbows.

AESPECS
Miami Tech Inc.
End Cap
Model: EC
Category:Metal Fittings
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Seam filled with UL hot melt glue to ensure an airtight seal.
Available in 24 gauge

Screen Shot 2018-04-24 at 10.18.24 AM
Miami Tech Inc.
Side Wall Cap
Model: SWC
Category:Side Wall Caps
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Backdraft damper or expanded metal screen available (SWC can be ordered with both options on a single unit).
Discharge hood area equal or greater than inlet pipe area.
Flanged base provides for good vent-to-wall contact and an easy caulking surface.
Long galvanized neck allows for easy union through walls to interior ducts.

Screen Shot 2018-04-24 at 10.33.13 AM
Miami Tech Inc.
Galvanized Roof Vents
Model: GRV
Category:Roofing Products
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity. Birdscreen standard on all roof vents, unless ordered with damper. Sealed seams keep out the elements.
Flanged base provides for good vent-to-roof contact and easy caulking surface.

GRV-Specs
Miami Tech Inc.
Aluminum Roof Vents
Model: ARV
Category:Roofing Products
Material:Aluminum
Gauge:.018

Birdscreen standard on all roof vents, unless ordered with damper.
Sealed seams keep out the elements.
Flanged base provides for good vent-to-roof contact and easy caulking surface.

Screen Shot 2018-04-24 at 11.01.29 AM
Miami Tech Inc.
Eave Vent
Model: EV
Category:Roofing Products
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Discharge hood area equal or greater than inlet pipe area.
Stitch welded inlet tube.
Rounded flange corners for added safety.
Flanged base provides a solid fastening surface.

EVL: Eave Vent with lip only.
EVDL: Eave Vent with lip and damper.

ev2

Screen Shot 2018-04-24 at 11.16.38 AM
Miami Tech Inc.
Wall Stack Pipe
Model: WSP
Category:Wallstack Products
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity.

Screen Shot 2018-04-24 at 11.51.32 AM
Miami Tech Inc.
Hanging Strap
Model: HS
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:30ga / 26ga / 22ga

Galvanized steel provides excellent corrosion resistance and longevity.
Multiple widths and various gauges available to meet your needs.
Available in pallet quantities of 50, 100, or 200 pieces.

Screen Shot 2018-04-24 at 12.02.37 PM
Miami Tech Inc.
Flex Duct Connector
Model: DC / DCL
Category:Collars
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resistance and longevity.
Sold in box quantities of 25 pieces.

DC: 4.5" body-length flex duct connector.
DCL: 6" body-length flex duct connector.

dcl

Screen Shot 2018-04-24 at 12.21.50 PM
Miami Tech Inc.
Refrigerant Line Cover
Model: LC
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga

Galvanized steel provides excellent corrosion resitance and longevity.
Hemmed edges.
Sold in bundle quantities.
Custom sizes available.

Screen Shot 2018-04-24 at 12.31.16 PM
Miami Tech Inc.
Adjustable Filter Rack
Model: FR
Category:Filter Racks
Material:Galvanized Steel
Gauge:14ga

Galvanized steel provides excellent corrosion resitance and longevity.
Welded construction for added strength.
Pre-punched holes for easy fastening to air handler or base.
Rubber strips included to minimize vibration.

Screen Shot 2018-04-25 at 8.44.46 AM
Miami Tech Inc.
Aluminum Z-Bar
Model: ZB
Part No.ZB
Category:Air Conditioning Accessories
Material:Aluminum

Screen Shot 2018-04-26 at 9.23.53 AM
Miami Tech Inc.
In-line WYE
Model: ILW
Category:Metal Fittings
Material:Galvanized Steel
Gauge:30ga / 28ga

Galvanized steel provides excellent corrosion resistance and longevity.
Female connection at the base.
Crimped male connection on the top and side branch.

Screen Shot 2018-04-26 at 10.04.41 AM
Miami Tech Inc.
Boot Clip
Model: BC
Category:Air Conditioning Accessories
Material:Galvanized Steel
Gauge:26ga

BCM: Miami Tech's Design
BCE: Industry Standard Design
CBC: Combo Clip - to be used with flanged or unflanged register box.

Screen Shot 2018-04-26 at 10.09.47 AM
Miami Tech Inc.
Dynamic Fire Damper
Model: 151A
Dynamic Fire Damper
Material:Galvanized Steel
Gauge:22ga

Designed with constant force springs in the horizontal configurations to ensure closure under airflow conditions.
Meets all UL and NFPA requirements for Primary Fire Dampers, and carries a UL555 classified fire damper label.
Approved for use where ducts penetrate partitions with fire resistance ratings of two hours or less.
1-1/2 hour rating for use in fire barriers rated two hours or less.
Optional installed duct sleeves available.

Screen Shot 2018-04-26 at 10.27.14 AM

UL
Miami Tech Inc.
Access Doors
Model: FSA115/116
Category:Access Doors
Material:Galvanized Steel
Gauge:24ga

Miami Tech Model FSA115 and FSA116 access doors are designed for quick installation in metal or fiberglass duct. They provide direct access to fire dampers for resetting, as well as any item requiring maintenance or inspection.
All FSA116 access doors are built with safety chain to secure door to frame.
Custom sizes available.

Screen Shot 2018-04-26 at 10.36.48 AM
TGM
Water Cooler
Model: MYL835S
-Deluxe design
-Double safety device for preventing overheat
-High efficiency compressor cooling
-Child safety lock faucet (optional)
-High power stainless steel hot water tank
-15L spacious cabinet
Emerson
BSS Suction Line Filter Drier
Model: BSS166S
BSS Suction Line Filter Drier

• Economical suction line drier for air conditioning applications
• Filtration to 40 microns
• Solid core construction
• Access fittings included
• Capacity ratings listed are nominal system tonnage

Specifications

Length: 6.95 in.
Conn. Size: 3/4 in. ODF
Cubic Inches: 16
R22/R410A Capacity: 5.5
Emerson
BSS Suction Line Filter Drier
Model: BSS167S
BSS-167S 7/8" ODF Suction Line Filter-Drier

The Builder Series filter drier provides an economical system protection for air conditioning applications.

Features:
Economical system protection for air conditioning applications
ODF - solid copper connections for easy installation
Solid core construction
40 micron fi ltration
Maximum working pressure - 680 psig
Emerson
Bi-Directional Heat Pump Drier
Model: TBF163S
Removes high moisture, organic and inorganic acids to protect your heat pump system
Corrosion resistant paint and solid copper ODF fittings
3/8 ODF connections
Nylon internal check valves
Metallum Enterprises
Filter Back Return Air Grille
Model: MRWF
- Extruded aluminum outer frame construction for extra strength
- Aluminum roll formed blades
- Blades crimped to insure smooth operation and rattle–free construction
- Resilient bright white coat finish
- Large free area design permits maximum air flow
- White mounting screws
- Available in a wide range of standard sizes
- Custom sizes available by special order
- Filter may be easily removed
Metallum Enterprises
Fixed Frame Return Air Grilles
Model: MR
- Extruded aluminum outer frame construction for extra strength
- Aluminum roll formed blades
- Blades crimped to insure smooth operation and rattle–free construction
- Resilient bright white coat finish
- Large free area design permits maximum air flow
- White mounting screws
- Available in a wide range of standard sizes
- Custom sizes available by special order
Metallum Enterprises
Ceiling Grilles
Model: C_WLM / C_WOB
- Extruded aluminum outer frame construction for extra strength
- Aluminum roll formed blades
- Blades sleeved with plastic grommets to insure smooth operation
- Rattle-free construction
- Resilient bright white coat finish
- Large free area design permits maximum air flow
- Individual adjustable blades
- White mounting screws
- Available in a wide range of standard sizes
- Custom sizes available by special order

- AVAILABLE IN 1, 2, 3 AND 4 WAY DEFLECTION PATTERNS
Metallum Enterprises
Side Wall Grilles
Model: SWWLM / SWWOB
- Extruded aluminum outer frame construction for extra strength
- Aluminum roll formed blades
- Blades sleeved with plastic grommets to insure smooth operation
- Rattle-free construction
- Resilient bright white coat finish
- Large free area design permits maximum air flow
- Individual adjustable blades
- White mounting screws
- Available in a wide range of standard sizes
- Custom sizes available by special order
Metallum Enterprises
Side Wall Grilles
Model: SWWOBDD
- Extruded aluminum outer frame construction for extra strength
- Aluminum roll formed blades
- Blades sleeved with plastic grommets to insure smooth operation
- Rattle-free construction
- Resilient bright white coat finish
- Large free area design permits maximum air flow
- Individual adjustable blades
- White mounting screws
- Available in a wide range of standard sizes
- Custom sizes available by special order

Miami Tech Inc.
Aluminum Pipe Stands
Model: PS1216
- Extruded Aluminum 6061 T6 construction
- Precision robotic welding to fullfil quality standards
- Adjustable height
- Available sizes from 12" to 48" wide
Miami Tech Inc.
Fortress LDK 12' Lineset Wall Duct Kit
Model: LDK
Kit includes 12’ of duct and fittings for a standard installation.

LDK Kit includes:
LD – Ducting 4’ Long ( 3 )
LJ – Couplers ( 2 )
LW – Wall Inlet ( 1 )
LEN – End Fitting ( 1 )
LK – 90º Flat Ell ( 1 )

Assures complete flexibility of installation
Professional grade ducting, protects and hides unsightly mini-split linesets in a snap
Fortress is perfect for mini-splits, high velocity and conventional split air conditioning systems.
Fortress protects lineset, wiring and drain hose from weather, vandalism, pet and pest damage.
Fortress installs quickly, and can be easily accessed for repairs or replacement of the lineset.
Genie
GL-4 Lift
Model: GL-4
The Genie® Lift™ GL™-4 lift can be used as a hand truck, forklift or dolly. This Genie Lift model is well suited for shipping/receiving, lifting heavy material to or from shelves, installing and repairing HVAC components, lifting and moving automotive parts, transporting computer and server components, as well as other manufacturing applications.

Overview

- Loads in a pickup truck for easy transport
- Telescoping aluminum frame
- Choose from three bases to customize for the application
- Optional load platform, boom and aluminum ladder increase productivity
Genie
GL-8 Lift
Model: GL-8
With three base models and many accessories to choose from, the Genie® Lift™ GL™-8 lift is ideal for all your material handling needs. Compact and versatile, Genie Lift models can be loaded in a pickup truck for easy transport.

Overview

- Can be used as a hand truck, forklift or dolly
- Telescoping aluminum frame
- Choose from three bases to customize for the application
- Optional load platform, boom and aluminum ladder increase productivity
Genie
GL-12 Lift
Model: GL-12
Choose from three bases to customize the Genie® Lift™ GL™-12 lift for the job — it can be used as a hand truck, forklift or dolly for increased versatility and value. This Genie Lift model is great for shipping/receiving, heavy material on shelves, HVAC installation/repair and more.

Overview

- Loads in a pickup truck for easy transport
- Telescoping aluminum frame
- Choose from three bases to customize for the application
- Optional load platform, boom and aluminum ladder increase productivity
Genie
Superlift Contractor SLC-18
Model: SLC-18
Ideal for construction firms and all types of contractors, the Genie® Superlift Contractor® SLC™-18 lift can be easily operated by one person to lift, lower and move heavy loads. The captive stabilizer with patented “locking system” comes standard to provide additional lateral support for heavy loads.

Overview

Extremely durable yet also lightweight and portable
A variety of load handling accessories make this unit extremely versatile
Legs fold up and attachments are removable for easy storage
Quiet, two-speed winch option — shift gears on the fly
Genie
Superlift Contractor SLC-24
Model: SLC-24
Well suited for industrial applications and HVAC installations, the Genie® Superlift Contractor® SLC™-24 lift comes standard with the captive stabilizer with patented “locking system” that provides additional lateral support for heavy loads. It can be easily operated by one person to lift, lower and move heavy loads.

Overview

- Extremely durable yet also lightweight and portable
- A variety of load handling accessories make this unit extremely versatile
- Legs fold up and attachments are removable for easy storage
- Quiet, two-speed winch option — shift gears on the fly
Metallum Enterprises
Slot Linear Diffuser
Model: MSASD-XXX-XEF
- Extruded aluminum
- Resilient bright white coat finish
- Aluminum adjustable pattern control
- Available in a wide range of standard sizes
- Custom sizes available by special order
- Available Flange Frame mountings: Concealed, Eye Bolt, Screw Mount and T-Bar models
Metallum Enterprises
A/C Condensing Unit Stands
Model: MCUS
Construction & Material:

- Extruded Aluminum 6061 T6 construction
- Precision robotic welding to fullfil quality standards
- Available sizes from 18" to 32" high, 3' to 18' long

Features:

- Designed in accordance with the 2004 Florida Building Code for use within and outside the high velocity hurricane zone
- Miami-Dade County Product Approval NOA# 09-0720.01
- State Certified FL7935.1
Metallum Enterprises
Air Handler Stands
Model: MAHS
- Frame & Support Legs: 16 Gauge Galvanized Steel
- Filter track for 1" filters
- Galvanized Heavy Duty
- No Assembly Required
- Fit most Air-Handlers depth - 22"
- Adjustable Width - 26"
- Plastic Angle Caps on lower leg openings
- Available sizes: 18", 24", 30", 36" height
- Custom sizes available
Metallum Enterprises
Aluminum Wall Brackets
Model: 364860
- Extruded Aluminum 6061 T6 construction
- Precision robotic welding to fullfil quality standards
- Adjustable height
- Available standard size 36" x 48" x 60"
- Other sizes are available
Ultravation
Ultravation® M-Series™ UV for Mini-Split Ductless
Model: M-Series
UV light for mini-splits and ductless applications.
Keeps mold away from fan, coil and other surfaces. Stops bad odors.
Designed to fit major brands with easy installation, effective disinfection and smart electronics.

• Super compact / high intensity
• Easy fit / install
• 110-240 VAC (auto sensing)
• 360° UV shield rotation
• One or two lamps
• Visual and audible lamp-out alarm
• Audible alarm auto silences in 30 seconds
• Twin LED display
• Rugged construction
• Three-year system warranty
(lamps one-year)
Miami Tech Inc.
Wall Louvers
Model: WLF-DA15
- Heavy extruded aluminum construction.
- Designed for outside applications.
- Bird or insect screens available.
- Miami-Dade County approved wall louvers are available.
- Available finishes include:
- Mill finish aluminum
- Durable sky-white powder coat finish

Available in the following sizes:

12" x 12"
14" x 14"
18" x 18"
20" x 20"
24" x 12"
24" x 24"
Drakken
IHEAT Hot Spot AHSH
Model: AHSH
Features:
- Heat Exchangers are 100% stainless Steel
- Compact and Light Weight for easy install
- Safety Thermostatic Cut off
- LED Indicator lights shows Power
- 5-Power Settings
- Microprocessor Controlled
- Complies with US and Canadian Safety Standards


Benefits:
- Save Valuable Space
- Save Water
- Small enough to be installed anywhere
- ASTM 304 Stainless Steel Heat Exchangers
- Endless Supply of Hot Water!
- Can be connected to a generator
- Great for Portable Showers
Polymer Adhesives
Cast of Mastic
Model: CADS
Fiber reinforced, water-based, duct sealant used to pressure seal all types of HVAC systems including metal and flex duct.

• Fiber reinforced for additional strength.
• UL 181 AM & BM listed for all types of duct systems.
• Exceeds all SMACNA pressure and sealing classes.



Solids content: 67%

Coverage: 80 sq. ft per gallon.
Design Polymerics
Fiber Reinforced Water-Based Duct Sealant
Model: DP1030
Design Polymerics DP-1030 is a fiber reinforced, water based, premium quality, UL Listed 181A-M / B-M, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use.